How To Install Bagger On Cub Cadet Zero Turn

The following video will show you lot how to install a triple bagger on your riding mower. The tools needed for installation include a 1/2 in. wrench and two 7/16 in. wrenches. Depending on your model, the instructions in this video may vary slightly. Always be sure to check your operator's manual for detailed instructions.

Instructions:

Pace 1: Prepare your riding mower for maintenance. Place your mower on a flat, level surface. Turn the mower off and make certain the engine is cool.  Remove the ignition key, disconnect the spark plug ignition wire, and engage the parking brake. This helps ensure the machine doesn't start accidentally and crusade you lot or those around y'all harm.

Stride ii: Get-go by laying out the parts of the triple bagger.

Stride 3: Assemble mounting bracket. Adhere the ii side brackets to the rear zipper. Apply the 2 carriage bolts and the wing knobs to secure them.

Stride four: Flip over the assembly and mount the hitch support bracket. Utilise the holes furthest away from the rear hooks. Use the two carriage bolts and the wing knobs to secure them.

Stride 5: Mount assembly on tractor. Identify hooked ends of the mounting associates over the shoulder bolts on the rear frame of the tractor. Apply the clevis commodities and hairpin prune to secure the bracket to the tractor.

Step 6: Install the upright back up bracket.

Pace 7: Identify hanger associates onto the upright back up bracket. Secure using ii carriage bolts and two 1/2" lock basics and washers.

Step 8: Snap the upper chute support into place on the hanger assembly.

Step 9: Install the bagger cover. Slide the swivel pin through the mounting tabs.

Stride x: Place the bags on the hanger subclass.

Pace 11: Use the foam strip to the upper chute.

Step 12: Prepare the chute for installation. Install the kicking rod mount using two nuts and 2 bolts. Tighten using two 7/16" wrenches.

Step 13: Slide the boot rod into the deck.

Step 14: Secure the kick with a fly knob.

Stride 15: Install the upper chute.

Slide the upper chute onto the lower chute kick and position in the upper chute support.

Cub Buck 18-carat Parts

Always employ genuine OEM replacement parts when servicing your equipment. Use our parts finder to locate and order whatever replacement parts yous may need for maintenance. Refer to your owner's manual for boosted maintenance information.

Source: https://www.cubcadet.com/en_US/how-to/knowledge-how-to-install-a-triple-bagger-on-a-riding-mower.html

Posted by: allencambactint1987.blogspot.com

Share this post